Setting up ZHA in Home Assistant: the serial port step everyone gets stuck on
-
I've helped a few friends set up ZHA lately, and they all got stuck in the same places. Here's the short version.
- Plug in the coordinator with a USB extension cable. Do it before you start. It saves debugging later.
- Go to Settings > Devices & Services. ZHA often discovers the stick automatically. If not, add the ZHA integration manually.
- Pick the serial port carefully. Choose the /dev/serial/by-id/... path, not /dev/ttyUSB0. The by-id path survives reboots and adding other USB devices.
- Let it create the network. The defaults are fine for most people.
- Pair mains devices first, then battery sensors.
ZHA or Zigbee2MQTT? ZHA is the easiest start. Z2M gives more control. I covered the differences in another thread.
Full step-by-step guide: https://zigbeehubs.com/blog/zigbee-home-assistant/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login