<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Setting up ZHA in Home Assistant: the serial port step everyone gets stuck on]]></title><description><![CDATA[<p dir="auto">I've helped a few friends set up ZHA lately, and they all got stuck in the same places. Here's the short version.</p>
<ol>
<li>Plug in the coordinator with a USB extension cable. Do it before you start. It saves debugging later.</li>
<li>Go to Settings &gt; Devices &amp; Services. ZHA often discovers the stick automatically. If not, add the ZHA integration manually.</li>
<li>Pick the serial port carefully. Choose the /dev/serial/by-id/... path, not /dev/ttyUSB0. The by-id path survives reboots and adding other USB devices.</li>
<li>Let it create the network. The defaults are fine for most people.</li>
<li>Pair mains devices first, then battery sensors.<br />
ZHA or Zigbee2MQTT? ZHA is the easiest start. Z2M gives more control. I covered the differences in another thread.<br />
Full step-by-step guide: <a href="https://zigbeehubs.com/blog/zigbee-home-assistant/" rel="nofollow ugc">https://zigbeehubs.com/blog/zigbee-home-assistant/</a></li>
</ol>
]]></description><link>https://smarthome.forum/topic/137/setting-up-zha-in-home-assistant-the-serial-port-step-everyone-gets-stuck-on</link><generator>RSS for Node</generator><lastBuildDate>Sun, 22 Nov 2026 12:42:57 GMT</lastBuildDate><atom:link href="https://smarthome.forum/topic/137.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 02 Nov 2026 07:46:42 GMT</pubDate><ttl>60</ttl></channel></rss>