Getting Arduino talking Zigbee: PAN IDs, modules and the mistakes I made
-
I spent a weekend getting an Arduino to send sensor data over Zigbee. Here's what I'd tell myself at the start.
Setup
• Arduino plus an XBee or similar Zigbee module over serial.
• A second module or a USB coordinator on the receiving end.
Mistakes I made
• Mismatched PAN ID: the modules must share the same PAN ID or they'll never see each other. This took me an embarrassingly long time to spot.
• Wrong roles: one device has to be the coordinator. Two routers won't form a network.
• Baud rate mismatch between the Arduino and the module.
Can Arduino be a Zigbee gateway? With the right module, yes. For a smart home gateway, though, a ready-made coordinator or an ESP32-C6 is far easier.
Range depends on the module and antenna, so test it at the distance you actually need.
Full Arduino Zigbee setup guide: https://zigbeehubs.com/blog/arduino-zigbee/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login