<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Getting Arduino talking Zigbee: PAN IDs, modules and the mistakes I made]]></title><description><![CDATA[<p dir="auto">I spent a weekend getting an Arduino to send sensor data over Zigbee. Here's what I'd tell myself at the start.<br />
Setup<br />
• Arduino plus an XBee or similar Zigbee module over serial.<br />
• A second module or a USB coordinator on the receiving end.<br />
Mistakes I made<br />
• Mismatched PAN ID: the modules must share the same PAN ID or they'll never see each other. This took me an embarrassingly long time to spot.<br />
• Wrong roles: one device has to be the coordinator. Two routers won't form a network.<br />
• Baud rate mismatch between the Arduino and the module.<br />
Can Arduino be a Zigbee gateway? With the right module, yes. For a smart home gateway, though, a ready-made coordinator or an ESP32-C6 is far easier.<br />
Range depends on the module and antenna, so test it at the distance you actually need.<br />
Full Arduino Zigbee setup guide: <a href="https://zigbeehubs.com/blog/arduino-zigbee/" rel="nofollow ugc">https://zigbeehubs.com/blog/arduino-zigbee/</a></p>
]]></description><link>https://smarthome.forum/topic/136/getting-arduino-talking-zigbee-pan-ids-modules-and-the-mistakes-i-made</link><generator>RSS for Node</generator><lastBuildDate>Sun, 22 Nov 2026 12:42:53 GMT</lastBuildDate><atom:link href="https://smarthome.forum/topic/136.rss" rel="self" type="application/rss+xml"/><pubDate>Mon, 02 Nov 2026 07:46:02 GMT</pubDate><ttl>60</ttl></channel></rss>