CC2531 on a Pi 4 with Zigbee2MQTT: it works, but here's why I moved on
-
My first Zigbee2MQTT setup was a CC2531 stick on a Raspberry Pi 4. Here's an honest look back for anyone tempted by one.
Getting it running
• Flash the right coordinator firmware first.
• Install Mosquitto and Z2M, then set the serial port in Z2M's config.
• Pair devices one at a time, close to the stick.
Why it got unstable
• Limited capacity: once I passed a modest number of devices, things started dropping.
• Weak radio: no external antenna and easily affected by the Pi's USB 3.0 ports.
• Older Zigbee stack: some newer 3.0 devices weren't happy.
What I'd do instead
Buy a ZBDongle-P or ZBDongle-E for not much more money. Use the CC2531 as a cheap router or for experiments.
Full install guide, if you still want to try it: https://zigbeehubs.com/blog/cc2531/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login