EFR32MG21 coordinators in Zigbee2MQTT: the adapter setting that fixed my setup
-
If you've just bought an EFR32MG21-based dongle (ZBDongle-E, ZB-GW04 or SLZB-06M) and it's misbehaving in Zigbee2MQTT, check this first.
The setting
In Z2M, use the ember adapter for EFR32 sticks. The older ezsp driver is deprecated, and switching to ember fixed a lot of instability for me.
Other things that helped
• Update the firmware to a recent EmberZNet release that matches what Z2M expects.
• USB extension cable: yes, again.
• Don't mix up E and P. EFR32 sticks use ember. TI CC2652 sticks use zstack. Pick the wrong one and Z2M won't start.
Which one?
• ZBDongle-E: a good all-rounder.
• ZB-GW04: a cheap, decent alternative.
• SLZB-06M: if you want Ethernet or PoE.
Full EFR32MG21 dongle comparison: https://zigbeehubs.com/blog/efr32mg21/
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login