<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Building a Zigbee gateway on a Raspberry Pi: my setup notes]]></title><description><![CDATA[<p dir="auto">A Raspberry Pi with a USB coordinator is still one of the cheapest ways to run a fully local Zigbee network. Here's what worked for me.<br />
Hardware<br />
• Raspberry Pi 4 (a Pi 5 is fine too) with a decent power supply.<br />
• A Zigbee 3.0 USB coordinator such as the SONOFF ZBDongle-P.<br />
• A USB extension cable. This is not optional. The Pi's USB 3.0 ports and Wi-Fi sit right next to the dongle and cause interference.<br />
• An SSD instead of an SD card if it's going to run 24/7.<br />
Software<br />
I run Home Assistant OS with ZHA. Zigbee2MQTT is a good alternative if you want more control.<br />
Tips<br />
• "Permit join" only needs to be on while you're pairing. Turn it off afterwards.<br />
• Pair mains-powered devices first so the mesh has routers before you add battery sensors.<br />
• Everything keeps working when the internet goes down, which was the main reason I went this route.<br />
Step-by-step guide here: <a href="https://zigbeehubs.com/blog/raspberry-pi-zigbee/" rel="nofollow ugc">https://zigbeehubs.com/blog/raspberry-pi-zigbee/</a></p>
]]></description><link>https://smarthome.forum/topic/96/building-a-zigbee-gateway-on-a-raspberry-pi-my-setup-notes</link><generator>RSS for Node</generator><lastBuildDate>Sun, 22 Nov 2026 12:42:54 GMT</lastBuildDate><atom:link href="https://smarthome.forum/topic/96.rss" rel="self" type="application/rss+xml"/><pubDate>Fri, 30 Oct 2026 08:41:14 GMT</pubDate><ttl>60</ttl></channel></rss>