<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[I turned an ESP32-C6 into a Zigbee coordinator. Here&#x27;s what tripped me up]]></title><description><![CDATA[<p dir="auto">I've been curious whether a cheap ESP32-C6 board could run a Zigbee network on its own, since it has an 802.15.4 radio built in. Short answer: it can, but there are a few gotchas.<br />
What caught me out<br />
• Zigbee Mode setting: in Arduino IDE you have to set Tools &gt; Zigbee Mode to ZCZR (coordinator/router). If you leave it on End Device, the coordinator sketch won't compile.<br />
• Partition scheme: it needs the matching Zigbee ZCZR partition for your board's flash size. Copying a setting from a tutorial for a different board caused me problems.<br />
• Charge-only USB cable: the board powered on but never showed up as a port. Swapping the cable fixed it.<br />
• Joining vs binding: my test bulb joined fine but didn't respond. The endpoint and binding setup was the real issue, not pairing.<br />
Would I run my house on it?<br />
No. It's a great learning tool and a solid base for a custom gateway. For a permanent Home Assistant network with dozens of devices, I'd still use a dedicated coordinator like a ZBDongle-P or an SLZB-06.<br />
Full walkthrough with the coordinator sketch and a troubleshooting checklist: <a href="https://zigbeehubs.com/blog/esp32c6/" rel="nofollow ugc">https://zigbeehubs.com/blog/esp32c6/</a></p>
]]></description><link>https://smarthome.forum/topic/91/i-turned-an-esp32-c6-into-a-zigbee-coordinator.-here-s-what-tripped-me-up</link><generator>RSS for Node</generator><lastBuildDate>Sun, 22 Nov 2026 12:42:53 GMT</lastBuildDate><atom:link href="https://smarthome.forum/topic/91.rss" rel="self" type="application/rss+xml"/><pubDate>Thu, 29 Oct 2026 11:22:46 GMT</pubDate><ttl>60</ttl></channel></rss>