Start with your heating system, not the brand

This was my first mistake. Not every Zigbee thermostat works with every type of heating, and the categories are pretty different:

Central HVAC (24V): your typical furnace or heat pump setup. Most wall thermostats are built for this.
Electric baseboard or radiant floor (line voltage): needs a thermostat rated for high voltage. A standard 24V unit will not work here and can be dangerous to wire in.
Water radiators: you don’t need a wall thermostat at all. A Zigbee TRV (thermostatic radiator valve) mounts directly on each radiator and gives you room by room control.

If you only check one thing before buying, check this.

Check for a C-wire

A lot of 24V thermostats want constant power through a C-wire. My hallway didn’t have one. Your options if you’re in the same boat:

Go with a battery-powered model
Use a thermostat that ships with a power extender kit
Run a new wire if you’re comfortable doing it (or get an electrician)

Make sure your hub actually supports it

Zigbee thermostats don’t connect to your router, they join your mesh through a coordinator. I run Home Assistant, and most of the models I looked at work through either Z2M or ZHA, but device support isn’t identical between the two. Before buying, I’d search the Z2M supported devices list or the ZHA quirks for the exact model number. Zigbee 3.0 certified devices generally give you the fewest headaches.

Why I went Zigbee instead of Wi-Fi

Schedules and automations keep running locally when the internet drops
Mains-powered thermostats act as routers, so they actually strengthen the mesh
Response to automations felt noticeably quicker than the cloud-based unit I had before

One heads up: if your thermostat is battery powered, it’s an end device, not a router. It won’t help your mesh, and it needs a decent router nearby to stay reliable. Worth checking the LQI after pairing.

Models worth a look

While researching, I found this breakdown of the best zigbee thermostats really useful because it splits recommendations by heating type instead of just ranking everything together. A few that stood out for different setups:

Sinope TH1124ZB: for electric baseboard heating, also reports energy usage
SONOFF TRV: for radiator systems, works well with Home Assistant
Centralite Pearl: a budget-friendly option for standard 24V systems
Aqara W100: if you’re already in the Aqara ecosystem
Third Reality: simple battery-powered option with a local LCD readout

Note that the Stelpro KI, which a lot of older threads recommend for baseboard heaters, has been discontinued, so don’t count on finding it new.

My quick checklist before buying

Confirm heating type (24V, line voltage, or radiators)
Check whether you have a C-wire
Look up the exact model in Z2M or ZHA support
Decide if you want it acting as a router (mains powered) or not

Curious what everyone else is running. Has anyone had trouble getting a thermostat’s setpoint or mode to sync properly in Z2M? That’s the one area where I’ve seen the most inconsistency between models.